Main application: This machine is suitable for drilling holes for undercut anchors on marble, granite, ceramic board, honeycomb board, high-density cement board, and various man-made fiber boards. All dry hanging undercut anchor holes processing.
This equipment has reasonable structure design, small size, light weight, quick and light operation, adopts one-way 220V voltage, low power consumption, energy saving and environmental protection, and has two operation modes: fixed and mobile. It is especially suitable for the needs of small and medium-sized curtain wall back bolts and project finishing.
Equipment Technical Parameters:
Maximum package size: 550*350*250 (mm)
Maximum vertical size: unlimited
Aperture: M7.2, M9, M11, M13
Undercut anchor hole drilling depth: 5-20mm (if the drilling depth is greater than 20, an extended drill bit needs to be customized)
Voltage: AC 220V
Rotating speed: 11000r/min (using the domestic first brushless angle grinder without carbon brush replacement for life)
Machine power: 1350W
Air pressure: power of the connected air pump is 2KW or above
Water pressure: power of the self-priming pump is 550W or 750W, and the head is more than 30 meters
Machine weight: 10KG
Parameters
|
Unit
|
VTDM-P02
|
Apr. weight
|
Kg
|
10
|
Max. drilling depth
|
mm
|
20
|
Drill rod length
|
mm
|
50
|
Rotating speed/Drilling speed
|
r/min
|
1100
|
Max. drill rod diameter
|
mm
|
13
|
Frequency
|
Hz
|
50
|
Rated voltage
|
V
|
220
|
Max. sound
|
dB
|
60
|
Min. drill rod diameter
|
mm
|
7
|
Output power
|
w
|
1350
|
Processing type(Dry or Wet)
|
Wet
|
|
Overall height
|
mm
|
350
|
Power source
|
Electric Supply
|
|
Overall length
|
mm
|
550
|
Overall width
|
mm
|
250
|
-
Different types of stone panels can be drilled
-
Sintering Drill Bit
¥Payment Required
-
Sintering Drill Bit
Need to replace sintering drill bit
Country | China |
Shop Location | New York, United States |
No reviews found!
No comments found for this product. Be the first to comment!
No comments found for this product. Be the first to comment!